AN ASSESSMENT OF METHODS OF TEACHING COMPUTER COURSES TO COMPUTER SCIENCE STUDENTS IN SELECTED NIGERIAN POLYTECHNICS
ATTENTION:
BEFORE YOU READ THE CHAPTER ONE OF THE PROJECT TOPIC BELOW,
PLEASE READ THE INFORMATION BELOW.THANK YOU!
INFORMATION:
YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL
PROJECT COSTS N5,000 ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE
COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08068231953,
08168759420
AN ASSESSMENT OF METHODS OF TEACHING
COMPUTER COURSES TO COMPUTER SCIENCE STUDENTS IN SELECTED NIGERIAN POLYTECHNICS
ABSTRACT
The study
focuses on the methods of teaching computer courses to computer science major
in selected Nigeria polytechnics.
It examines
the background, methods of teaching, tools and equipments use in teaching
computer courses to computer science major. The primary data for the study were
generated from well structured question broadcasted to random samples of 70 out
of 200 NDII students from federal polytechnic Nekede and Abia State Polytechnic
and supported with interviews. Frequency labels, simple proportion percentage
ratios, average, ranking, and chi-square (test for goodness of fit) for
validation of the some of the some of the findings as distributed.
From the
data presented and analyzed textbook is the mostly used tool for teaching computer courses to computer science
major.
Followed by
the computer but 20% students said that textbooks, chalkboard and computer are
the tools used.
It was also
established from the study that lecture method, lecture with discussion
practical assignment, and class discussions
are the methods of teaching computer
courses to computer science major.
Therefore
the researcher summarized and recommend that the NBTE (National Biand for
Technical Education) should improve on the
teaching tools by providing enough computers for teaching and learning
and the methods of teaching computer
courses to computer science major should be maintained and if possible across other departments.
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Education is an important sector
which cannot be fun with any serious country, state, organization or individual
and that is why an individual, organization or government uses every means to
make sure a good education is provided for her citizens (Adibe, 2001).
One of the means of this provision is the introduction of computer
science in polytechnics, as a course of study.
Computer science is the study of the
design and use of computer systems. One goal of the computer science department
is to provide the student with the tools
to identify those problem that are best solved by means of a computer and to
design and implement effective, economical, and creative solutions.
Computer science as an academic
discipline systematically includes three domains: Theory, and abstraction, and
design.
The curriculum’s required courses
give the students a strong foundation in
both the software and hardware aspects of computing, as well as the mathematics
and science that underline the discipline. The electives in the later years
allow the student to study more deeply some particular area of computer
science. The department courses and programmes
continue to respond to changing g requirements for professional
employment in computer science.
It is the responsibility of the
student to understand and fulfill polytechnic, and Department requirements. These requirements
are described is the polytechnic has gone a ling way to keep those individuals
(computer operators) in various way:
i. To acquire formal
education in computer
science
ii To register fully as members in
Nigeria
computer society.
Iii to reduce non-professionals in the field.
Computer is an electronic device,
which is capable of receiving, sorting and retrieving information with
tremendous speed, if computer is effectively used, it can help teachers teach
computer science students visually in all the computer courses.
This study based on the
assessment of the methods of teaching computer courses to computer
science major in selected Nigerian Polytechnics is trying to find out those teaching methods use in
teaching computers courses.
According to McCathy (1989) common
teaching methods are lecture method, lecture with Discussion, panel of experts,
Brainstorming, video tapes, class Discussion, case studies, Role playing,
Report-Back sessions, worksheets/surveys, index card exercise, Guest speaker,
values clarification exercise.
IPSJ Journal (2001), state that the
method of teaching computer science in a department of liberal Art is from
technique (concretion) to theory (abstraction), of from practices to lecture.
In a physical classroom these is a
standard, set of equipment and tools, this usually includes audio-visual
equipment such as textbook, a chalkboard, video-visual video player and tape recorder.
1.2 AIMS AND OBJECTIVES OF THE STUDY
The aims and objectives of the study
are to assess the methods of teaching computer courses to computer science
major in selected Nigeria polytechnics.
1. It investigated whether textbooks and
chalkboard the only teaching and
learning tools in teaching computer courses.
2. It investigated whether multimedia
instructional aids are used for
both teaching and learning in computer
science courses.
3. It investigated whether E-learning is
used in teaching introduction to
computers.
4. To investigate the most common teaching
methods for computer courses to
computer science majors.
1.3 STATEMENT OF PROBLEMS
The objective of teaching computer
courses in Nigeria Polytechnics include to equip students with the necessary
knowledge that will aid them to identify those problems that can be solved by
means of computer system, and to design and implement effectively.
Another objective of the study is to
provide the intellectual foundation for future professional development. A
cornerstone in this study is ability fro student to reason logical. It is
essential that student should be familiar with basic concepts in many computer
courses.
Although, there are some other
problems such as:
- Lack of lecturers to teach
computer courses.
- Lack of teaching tools
- Lack of application of
computer to real world situation in their programme of study.
- Extreme abnormal dislike
or fear and dread of mathematics (one of the
credit required for one to study
computer science).
1.4 PURPOSE OF THE STUDY
The purpose of
the study is to the methods of teaching
computer courses to computer science major.
Also to
educate student to succeed in his/her professional career, which takes place in
the context of rapidly changing technology. In order to succeed in this area, the
student must have certain knowledge, skills and attitudes.
1.5 RESEARCH QUESTION
The
objective of the research is to determine those tools/ methods that are used in
teaching computer science major in Federal Polytechnic Nekede and Abia State Polytechnic.
In order to
conduct an effective study on the central theme of this work, the following
critical questions have been addressed namely:
(a) What are the tools used in
teaching computer courses?
(b) Is your polytechnic connected via
Internet?
(c) How effective is the use of
computer on the teaching and
(d) What are the most common teaching
methods of computer courses e.g. Introduction to computer, computer packages,
Computer Programming, and, Computer Hardware maintenance.
1.6 SIGNIFICANCE OF THE STUDY
Information
technology (IT) is providing for the use of computer aided (CAL) systems to
assist in the Education and training of students.
This study
will assist computer science students to know teaching methods both old and
new. It will help them to understand that developments in computer science will
make new applications profitable and new method viable.
1.7 SCOPE OF THE STUDY
The study is targeted at Federal
polytechnic Nekede Owerri, Imo State and Abia State Polytechnic it covers all
phases used in teaching computer courses. The wing topics will be addressed:
- Introduction to computer
- Computer packages
- Computer Programming
- Computer Hardware
Maintenance
1.8 LIMITATIONS OF THE STUDY
The
researcher encountered a lot of problems such as limited time provided for this
study.
Furthermore,
the researcher encountered the problem of limited number of respondents since
some of the respondents have not filled questionnaire of this type
before.
1.9 DEFINITIONS OF TERMS
COMPUTER An electronic device that can
accept data, process it and give
result/ information under
automatically stores program.
Computer
science The study of the design
and use of computer system. It is
a chameleonic discipline.
Teaching Is a sublime communion
of ideas whereby an inquisitive
soul gets to open up to the
light of knowledge
Multimedia A way of presenting to the user a combination of different forms of
information such as text, data, images, video, audio, and graphics.
Algorithms a clearly – defined
mathematics final used to solve a problem or run an operation
Animation A simulation of movement
created by displaying a series of pictures or frames, cartoons on television is
one example of animation
Program A set of instructions
given to computer to carry out particular task
Virtual Not real. Something
that is mere simulation or illusion of a real environment.
Videoconferencing A person-to- person discussion, involving
either individuals or groups in which participants are at different sites, using
computer networks to transmit audio and
video data.
Online Turned on and
connected. Users are considered online when they are connected to a computer
service through modem.
HOW TO GET THE FULL PROJECT WORK
PLEASE, print the following instructions and information if you
will like to order/buy our complete written material(s).
HOW TO RECEIVE PROJECT MATERIAL(S)
After paying the appropriate amount (#5,000) into our bank Account
below, send the following information to
08068231953 or 08168759420
(1) Your project topics
(2) Email Address
(3) Payment Name
(4) Teller Number
We will send your material(s) immediately we receive bank alert
BANK ACCOUNTS
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 0046579864
Bank: GTBank.
OR
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 2023350498
Bank: UBA.
HOW TO IDENTIFY SCAM/FRAUD
As a result of fraud in Nigeria, people don’t believe there are
good online businesses in Nigeria.
But on this site, we have provided “table of content and chapter
one” of all our project topics and materials in order to convince you that we
have the complete materials.
Secondly, we have provided our Bank Account on this site. Our Bank
Account contains all information about the owner of this website. For your own
security, all payment should be made in the bank.
No Fraudulent company uses Bank Account as a means of payment,
because Bank Account contains the overall information of the owner
CAUTION/WARNING
Please, DO NOT COPY any of our materials on this website
WORD-TO-WORD. These materials are to assist, direct you during your
project. Study the materials carefully and use the information in them to
develop your own new copy. Copying these materials word-to-word is CHEATING/
ILLEGAL because it affects Educational standard, and we will not be held
responsible for it. If you must copy word-to-word please do not order/buy.
That you ordered this material shows you have agreed not to copy
word-to-word.
FOR MORE INFORMATION, CALL:
08068231953 or 08168759420
AFFILIATE LINKS:
myeasyproject.com.ng
easyprojectmaterials.com
easyprojectmaterials.net.ng
easyprojectsmaterials.net.ng
easyprojectsmaterial.net.ng
easyprojectmaterial.net.ng
projectmaterials.com.ng
googleprojectsng.blogspot.com
myprojectsng.blogspot.com.ng
https://projectmaterialsng.blogspot.com.ng/
Comments
Post a Comment